Emperor Alexander I St. Petersburg State Transport University (Department of Wagons and Wagon Industries, Associate Professor)
Russian Federation
Russian Federation
Russian Federation
Russian Federation
Russian Federation
Purpose: To substantiate the selection and experimental development of an accelerated fatigue test of cast load-bearing parts of the 18-9891 Model innovative bogie. Methods: The experimental study of the 18-9891-Model bogie side frames with an axle load of 25 tons (245 kN) was conducted using the Locati method. The method under discussion is based on the hypothesis of linear summation of relative fatigue damages occurring during the testing of a full-scale component under conditions of gradually increasing loads over a given period of time. Results: The fatigue test results demonstrate that the Locati method is an effective means of ensuring the parameters of the side frame fatigue curve obtained when testing a single sample. The standard fatigue testing procedure for side frames necessitates the testing of nine full-scale components. Practical significance: The implementation of a novel accelerated fatigue testing method will lead to substantial reductions in time, materials and testing resources, both during the manufacturing of prototypes and in the mass production of cast load-bearing parts for freight wagons.
Load-bearing bogie, side frame, fatigue strength, accelerated test method
1. Shkol'nik L. M. Metodika ustalostnyh ispytaniy: spravochnik / L. M. Shkol'nik. — M.: Metallurgiya, 1978. — 304 s.
2. Oleynik N. V. Lineynaya gipoteza ustalostnyh povrezhdeniy i uskorennoe opredelenie predela vynoslivosti detaley / N. V. Oleynik, P. I. Grechenko // Problemy prochnosti. — 1989. — № 3. — S. 113–115.
3. Gol'd B. V. Osnovy prochnosti i dolgovechnosti avtomobiley / B. V. Gol'd i dr. — M.: Mashinostroenie, 1967. — 157 s.
4. Rekomendacii po uskorennomu opredeleniyu predelov vynoslivosti metodom Lokati. — M.: VNIINMASh, 1971. — 41 s.
5. RD 50-686—89. Metodicheskie ukazaniya. Nadezhnost' v tehnike. Metody uskorennyh ispytaniy na ustalost' dlya ocenki predelov vynoslivosti materialov, elementov mashin i konstrukciy.
6. GOST 33788—2016. Vagony gruzovye i passazhirskie. Metody ispytaniy na prochnost' i dinamicheskie kachestva.
7. Normy dlya rascheta i proektirovaniya novyh i moderniziruemyh vagonov zheleznyh dorog MPS kolei 1520 mm (nesamohodnyh) / GosNIIV-VNIIZhT. — M., 1996. — 317 s.
8. KD. Rama bokovaya: chertezh № 9891.01.00.001 / FGBOU VO PGUPS.
9. GOST 15150—69. Mashiny, pribory i drugie tehnicheskie izdeliya. Ispolneniya dlya razlichnyh klimaticheskih rayonov. Kategorii, usloviya ekspluatacii, hraneniya i transportirovaniya v chasti vozdeystviya klimaticheskih faktorov vneshney sredy.
10. GOST 32400—2013. Rama bokovaya i balka nadressornaya litye telezhek zheleznodorozhnyh gruzovyh vagonov. Tehnicheskie usloviya.
11. GOST 18321—73. Statisticheskiy kontrol' kachestva. Metody sluchaynogo otbora vyborok shtuchnoy produkcii.
12. Telezhki dvuhosnye gruzovyh vagonov. Model' 18-9891 s nagruzkoy na os' 25 ts (245 kN) i model' 18-9801 s nagruzkoy na os' 23,5 ts (230 kN). Ramy bokovye. Programma i metodika uskorennyh ispytaniy na ustalost' metodom Lokati / OOO «UIC-Vagony». — Nizhniy Tagil, 2024. — 33 s.
13. Nadressornye balki i bokovye ramy litye dvuhosnyh telezhek gruzovyh vagonov kolei 1520 mm. Metodiki ispytaniy na ustalost' / OAO «VNIIZhT» — OAO «NII vagonostroeniya». — 2010. — 14 s.
